Dishlex DX103SK Manuale Utente

User manualDishwasherDX 103

Fault code and malfunction Possible cause and solution• continuous flash of the start/cancel in-dicator light• 1 flash of the 'Finished' ind

The cleaning results are not satisfactoryThere are streaks, milky spots ora bluish coating on glasses anddishes• Decrease the rinse aid dosage.Dry wat

1 234Adjusting the level of the applianceMake sure that the appliance is level to close and sealthe door correctly. If the level of the appliance is c

If you connect the water drain hose to a trap spigot un-der the sink, remove the plastic membrane. If you donot remove the membrane, remaining food ca

NSW 2020, ABN 51 004 762 341 in respect ofAppliances purchased in Australia and Elec-trolux (NZ) Limited of 3-5 Niall Burgess Road,Mount Wellington, i

any loss or damage whether direct or indirect aris-ing from your purchase, use or non use of the Ap-pliance.10. For Appliances and services provided b

www.electrolux.com/shop 156998838-A-232011

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _

• Keep all detergents in a safe area. Do not let chil-dren touch the detergents.• Keep children and pets away from the appliancewhen the door is open.

Washing programmesProgram Degree of soil Type of load Program descriptionPots Heavy soil Crockery, cutlery, potsand pansPrewashMain wash up to 70°C2 i

3. Set the correct washing program for the type ofload and soil.4. Fill the detergent dispenser with the correct quan-tity of detergent.5. Start the w

– Make sure that glasses do not touch otherglasses.– Put small objects in the cutlery basket.• Plastic items and pans with non-stick coatings canretai

Caution! If the basket is in the upper position, donot put cups on the cup racks.Use of detergentOnly use detergents (powder, liquid or tablet) thatar

When the washing program operates, you cannotchange the program. Cancel the washing pro-gram.Warning! Only interrupt or cancel a washingprogram if nec

5Put the filter A in the bot-tom of the appliance. In-stall the flat filter correct-ly under the two guidesD.6Put the filter system inposition. To loc